Thanks to Keeps for sponsoring this video! Head to https://keeps.com/cleetus to get a special offer.
We got McFlurry out to make some hits on the Dyno before we test him later this week... needless to say it's running awesome!!
Swap Meet 90 spots available (gates open 7am for sellers) event open to public 9am-3pm!
EVENT DETAILS HERE for the swap meet and open track night! https://tickets.thefoat.com/FreedomFactory
Check out our new T-Shirts LIVE NOW on: http://cleetusmcfarland.com
Our 2023 Sponsors:
https://www.holley.com
https://texas-speed.com
https://www.motionraceworks.com
https://www.nittotire.com
https://www.summitracing.com
https://heatwavevisual.com
Cleetus2 Channel - https://goo.gl/Ph2wyo
Holley's channel - https://www.youtube.com/channel/UCeQfJXzg0gnfuM4tgmagCCw
**Social Media:
Instagram - https://goo.gl/LZvy5e
Facebook - https://goo.gl/gdwhh1

Yeah, we're cruising down the road. You just want to roll down your window and stick your head out and get some fresh air. Use your hat and your hairline. And that's why today's video is sponsored by Keeps.

Guys Keeps is an online subscription service that focuses on making it easier and more affordable for men to treat their male pattern baldness. Most customers see results within six months of using Keeps. You simply go on their website, answer a few questions about your hair loss, and Keep sends their clinically proven treatments right to your doorstep. At no point when you're getting signed up for Keeps Do you have to go to the doctor's office? All treatments are provided by a licensed medical provider and personalized to address your unique needs.

And these treatments are affordable. Jeeps is typically half the cost of normal Pharmacy Prices Keeps has helped nearly 1 million men keep their hair and guys today. To receive a special offer, you can use MyLink Keeps.com Cletus that's K-e-e-p-s.com Cletus and the link is in the description below. Thanks to Keeps for sponsoring today's video, Let's get to the live action.

Hell yeah, brother, you're on the please before on YouTube channel. Alright guys, here's the deal. We have so much crap at the shop don't know what to do with it. like we have old superchargers, old turbos all over the place, valve covers, transfer cases Oil Pan Intake It's at the point where it's out of control.

so we decided that we're gonna have a swap meet at the Freedom Factory to get rid of some of our junk. So September 24th we're having a swap meet. You can find all the details in the links in the description below. Come out to the swap meet.

We'll be there selling our stuff on some tables old school style. We're gonna try and get rid of a lot of this crap we don't use because it's weighing down our office. You know what I mean any day now. Yeah, I don't want a supercharger to fall through the roof in my office, but we got a bunch of old wheels and tires and just crazy stuff.

we're gonna be getting rid of maybe a car or two. So come to that swap meet on September 24th and then the day before September 23rd. So we're talking not this weekend, but next weekend we're going to be having a Cars and Coffee car show and then an open track night. That's all September 23rd and then the swap meet is September forth.

So come to the Freedom Factory Not this weekend, but next should be a lot of fun. And you can probably buy some stuff that you might need for your car for a good deal. Because we're You know, we're not trying to keep some of this stuff. We're gonna be making deals all day here on sale.

Fire Sale. Fire Sold Sold Sold. Everything's for sale. Come on down.

Freedom Factory September 24th This Hood Done. These headers I mean we're keeping it. Yeah, we're keeping them just in case. All right.

Well, we gotta like this way, because that way is the Keepers. You're mullet your prize position. Uh yeah. this shifter though.
For example I don't need that shifter. That's a great Eminem shifter. One of the best shifters out there. that's true.

We got freaking an intercooler core that we're not going to use. We got Parker's Hellcat intake that's here so it's for sale. OG Leroy Weld wheels probably get rid of those. Yeah! Turbo We got catch cans, water pumps, two steps, all kinds.

we don't need these anymore. big block stuff. Someone want to do a turbo kit on a budget? We got a good turbo. We got you a carburetor covers, throttle bodies we got Corvette axles stock Corvette axles don't need those where we're going.

We can just have too much crap and we're getting rid of it. So come to our swap meet. September 24th What the hell is this thing doing out of the dark room? Yeah. knocking the dust off.

All right guys. we got McFlurry out. We are about to put this thing on the Dino. the good old twin turbo Godzilla Lanco Fox body Now it's time to go drag racing again.

We're gonna put on the Dinos doing the power band is at it sounds pretty good. how's it? Miss the beat I guess 1300? how much boost? 30 pounds? All right? Yeah I Want two to make. Oh we got a cold front this week. it's gonna be gonna be like 70.

I Know that's gonna be nice so we might see Victoria's personal best later this week. So we're getting it out. We're gonna get it on the Dynamics Everything's good. We're also trying to figure out where we need to ship this thing where the power oh make flurry backing on in.

Let me get the Dino turned on real quick. One sec, you're on there dude. I Forget how narrow this car is. Kind of nice.

The world is still wondering when will we reach the limit of the plastic Godzilla intake that we still have on this engine? I Mean it's seen 32 pounds of boost? We know that? yeah, how much more can it handle? The good thing is is it's never popped back because that's usually when they go. Yeah, just a little backfire off the rev limiter that far could do it. but uh the hell Tech has such a smooth Rev on there. This thing never really Pops in bed so that's that's the good thing.

All right. Well, we might find out today. We're going to try and make 35, maybe 33-ish pounds of boost and see what it does I Have a feeling. pray for that intake everyone I Feel like it's going to be impressive.

It's going to probably make most of its power down low I Have a feeling it's still going to put out big numbers. Yeah I Want to put that new intake on really bad? so I wouldn't be mad if it blew up. Yeah I mean we can make it make it to force the explosion with nitrous, but let's see, uh, see what she can handle I Think we do a wastegate Pull big Dino day dude, you ready for this book? Ferlin's Mcclurry machine. Dude, is it back working back up in operation? It wasn't broken, We just didn't feel like cleaning it.
That's very true. That's very true. Pull the webs off her the old. Godzilla Fox Boost All right a little wastegate.

make sure I like it. Everything's dialed in. All right, firing the hole. Oh yeah, all right here we go.

Wastegate pull up. That is nice. I didn't rev it out that high because that was honestly a little worried in here. Just you know.

First, pulling a new car and it felt like he was making more power than I thought it was gonna she was Rowdy that's good. That's good all right and we'll uh, see what we're working with. that'll work. We're all thrown off because the computer shows I went to 6 500 RPM for the car and then the dyno computer since I went to 7200.

So I don't think I pulled it all the way into high gear I think I might have blacked out in there. Dude, there's so many levers in this freaking car. man. I Mean a lot.

a lot to do dude. All right. so the horsepower is still right Bill Actually the torque number would be higher so than what it showed. 815 horsepower.

I'm gonna try again on Just Gay and I'm gonna wrap it to like 7 000. We'll see what that is. I'll make sure I have all the levers back there. you go.

Screw that up. I think I mean that's the only explanation of why the RPMs wouldn't match up. It should. All right.

forgot some steps. Well bud, what's it looking like? Solid 10.9 pounds of boost. It was really rich and I don't know if that's because our wide van is dying because it sounded kind of good. It's kind of good for how rich it was, but it was rich.

well methanol. I Feel like you need to get away with that? Yeah, what was it? Middle of the pole? so like 3-0 Yeah, it's pretty rich. I don't know. Probably Here's the thing.

we don't ever operate the car at this low boost. No. So I think I'm just gonna leave it and we just see if it cleans up with more boots. Yeah, should we just go straight to more boost right now? Try.

like 20 pounds. All right right Two Dude, turn that. turn that knob. We're Not Gonna worry about the rerunning it with in the right gear.

just well. We'll see if if it changes on this one that we know that you goofed on the on the levers. oh that's gonna change fair enough how much you turn it up to Bud what's her knobs at? Well I'm pretty sure like whenever I want to make 20 pounds of boost I I think that I put like 17 pounds on the Dome before but I really don't remember because we just haven't ran to say that much. Well then just pick a number and you just send one.

I mean we just stick a number in there 17. that's a good number. Try 14 pounds down. Yes, come on, we can't get too crazy here.

See what that does? All right? All right. Everyone stand back, turn it to 12 bud. If it's falling off before it gets to seven then we know. Shifter sooner.

Bud Yeah I'll get it wrong or that? all right? 7 000 RPMs 14 Pay us out on the Dome baby. No banging and popping. Dude, the computer shut off. Are you kidding me? You kicked the computer off? Yeah, dude, that was a unit right there.
I made a lot more power than I thought it was. yeah she sounded Rowdy I shot some flew it out of the catch can? Yeah, we've seen that. Yeah, we're gonna have to inspect that real quick. That sounded like about 1100 horsepower.

maybe 12.. about blew my eardrums out. Damn here we go. This one's not even plugged in.

Yeah, so bad. we gotta get it back going. That was a pull Dude I Did a wheelie on the dino. Yeah! I know it was pretty.

Let me tell you how much boots it made real quick. Yeah, it sounds I'm not gonna lie, it sounded like a lot more. It's fun. The tires.

Oh okay, that's why I was so rowdy so she went all the way up 7 000, hooked back up. yeah, grab looks nice as the oh, let's see. yeah when it spun the tires, it made 31 pounds and settled back down to uh, like 26.. All right.

Sorry, that was a little spicy on the Dome pressure setting but damn that was sick. All right, so let's figure out the computer. It looks like they already got it back on. Well we'll do that again.

Same thing. Yeah I mean it didn't get hot or anything so I don't think it pushed any water. I think we just need to run the freaking uh, we need to run the filters on the Breather so it can actually stop some of that fluid. Pop them on there Damn dude I Want that number? That was nice.

We're gonna go for round three. We gotta close the hood because we need to run the filters or it's going to blow out of the catch can. So I don't want that if the intake explodes. Probably best to have the hood covered.

You guys should stand back if she's in the 30s. she was high. she was high. Also Let's get some some cranks in the straps.

You know how to turn the boost up on that thing. yeah I actually I Just got it figured out. I Got this. Uh oh nice.

Page 206 had it. Oh perfect. Oh yeah, he's cranking her down bud dial oh my. God Oh dude 13.55 Hey, you lost your belt though.

Oh my. I guess 13 30. holy crap that's a lot of horses brother. How much boost did it just make is what? I'm wondering.

lost the belt? Yeah, it didn't sound good up there. Wow yeah she was oh so. it laid over pretty early there. yeah a little bit there be early.

Oh the Boost might be coming down though. about 6 500 where it starts to fall. For some reason it's making a bunch of initial boost and then it's falling down. Oh dude, we got a bad pulley on here.

That guy right there. He's no bueno. Yeah, this one right here is either loose or something. Yeah brother, we got you a bad pulley wobbling or something.

Yeah, she's a little crooked man. she was singing like a canary up there. I was actually like damn, probably shouldn't be making this much better. I don't know if this engine can really hold up like Tasmanian Devil she out there singing solid 27 PSI out the back it's a lot of boost.
pretty spicy. had a little bit about 30 pounds and then it. for some reason this boost controller brings her slowly back down to like 27. So I don't know why our boost control is like that, but it's controlling the boots enough for me, you know.

I don't probably only good for 1300 horsepower. I mean we're on the dyno. What does it matter? what do you mean really? track numbers so I think that's no matter what. We need to shift this thing before 7 000.

yeah, 6500. Yeah. Still happy it's where she's at. ready to go clearly.

1355 55 horsepower I Didn't expect it to just crack off a 1350 horsepower pull on, you know, mid-20s for Boost But here we are. Dude sucker rips here we are. Well I guess it kind of made that number in the 30 pound to boost range I Don't know how far this Godzilla will go but we will find out. We're gonna take it to the track this week.

Got a little cold front at the end of the week so we're fired up to do some drag racing. That's it for now. Thanks for watching new for that. We'll freaking see you later! Foreign.


By Cleetus

13 thoughts on “Our twin turbo godzilla powered foxbody just made huge horsepower!!! with a plastic intake”
  1. Avataaar/Circle Created with python_avatars Daniel Boardman says:

    I do think talking to cometic about making an mls headgasket since they already have an upgraded one available. You could carry it through motion. Just hope the Godzilla makes it in another project.

  2. Avataaar/Circle Created with python_avatars Johnny Cole says:

    I believe you ford man now, welcome aboard

  3. Avataaar/Circle Created with python_avatars Rene Brookerd says:

    I heard rumors you are going to put A coyote in her and do away with the Godzilla engine. Any truth to this?

  4. Avataaar/Circle Created with python_avatars Adam Marsden says:

    I love mcflurry

  5. Avataaar/Circle Created with python_avatars Robert Boten says:

    Again your fabrication guy does a great job, he actually finishes projects really quick.

  6. Avataaar/Circle Created with python_avatars Jeremy Estrella says:

    Hey man.. I really dig the way y'all roll.. I know that this is a Longshot you just made a comment that you've got stuff everywhere and I've got a difficult situation right now and it's something always comes up and I cannot seem to put together the money to get ahold of a marquis I've got a Lincoln Town car that I've lived out of a couple years she's hurt and I need anything that will bolt up to a 97 town car especially front end parts and suspension I would come work it off if I could afford to get there. But it would be awesome if I was able to relieve you of a donor Marquis with any 97 Lincoln compatible parts

  7. Avataaar/Circle Created with python_avatars Smodoosh says:

    Cleetus and Team!

    I have a ‘23 Chevy 1500 with the 6.2. Been wanting to throw a supercharger on it and get it tuned right—have any advice and/or superchargers that would work? I know I missed the swap, ya boy is out in bfn Montana

  8. Avataaar/Circle Created with python_avatars BubbaStang74 says:

    Any used superchargers for a Gen one Coyote?2011

  9. Avataaar/Circle Created with python_avatars jester525 1 says:

    👍👍👍👍👍👍

  10. Avataaar/Circle Created with python_avatars James Urban says:

    What's that tier size ❤

  11. Avataaar/Circle Created with python_avatars charles weicht says:

    Cleetus are we baked bud 😂💪🏾

  12. Avataaar/Circle Created with python_avatars Paul Janssen says:

    Did you guys ever get your racetrack into a first-class operation or are you still playing around with other stuff. Me and my friend drove by to see what it look like. ☺️

  13. Avataaar/Circle Created with python_avatars Godzilla Garage says:

    ❤McFlurry making some sauce!!!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.