Thanks to Keeps for sponsoring this video! Head to https://keeps.com/cleetus to learn more and get 50% off your first order of Keeps.
Visit http://cleetusmcfarland.com to check out all of our FRESH new merch!!!
Roman Atwood's duster is just now wrapping up and it's looking SICK!!! It's loud, but it is making the power to kill some tires at Cleetus and Cars Bristol???
Hope you guys are stoked about the Donnie 2.0 Giveaway! Check out these links to get entered!
Here’s how to enter: During the Promotion Period, eligible entrants will automatically receive one (1) entry for every $5 spent on any of the following:
- In-person admission tickets PURCHASED AT https://www.bristolmotorspeedway.com/events/cleetus-cars-and-the-bristol-1000/ for Cleetus & Cars on September 3, 2022, and/or The Bristol 1000 on September 4, 2022 at the Bristol Motor Speedway (collectively the “Event”);*
- The livestream pay per view for Cleetus & Cars / The Bristol 1000 purchased at
https://www.cleetusmcfarland.com/pages/cleetervision
- Cleeter Crew one-year subscription purchased at https://www.cleetusmcfarland.com/pages/cleetercrew
Existing Cleeter Crew subscribers will automatically receive 20 entries.
*IMPORTANT: Your purchase for in-person tickets to the Event must be made through
https://www.bristolmotorspeedway.com/events/cleetus-cars-and-the-bristol-1000/. Purchases made through any other website or at the Bristol Motor Speedway ticket booth will NOT earn entries.
Hope you guys are ready for an EPIC time in Bristol! September 3-4, 2022 BRISTOL In-person tickets https://www.bristolmotorspeedway.com/events/cleetus-cars-and-the-bristol-1000/
Get tickets to Klutch Kickers here!!! https://tickets.thefoat.com/FreedomFactory/Klutch+Kickers+100k+Drift+Series+Round+3/tickets/id-4gYkP-0XNkBS/
September 3-4, 2022 BRISTOL Driver registration Cleetus & Cars https://tickets.thefoat.com/FreedomFactory/Cleetus+%26+Cars+Bristol+Competitor+Registration/tickets/event-239620/
Our 2022 Sponsors:
https://www.holley.com
https://texas-speed.com
https://www.motionraceworks.com
https://www.nittotire.com
https://www.summitracing.com
https://heatwavevisual.com
Cleetus2 Channel - https://goo.gl/Ph2wyo
Holley's channel - https://www.youtube.com/channel/UCeQfJXzg0gnfuM4tgmagCCw
**Social Media:
Instagram - https://goo.gl/LZvy5e
Facebook - https://goo.gl/gdwhh1

By Cleetus

15 thoughts on “Our mini duster project has evolved…. heads/cam/zoomies and some freedom!!! sounds insane”
  1. Avataaar/Circle Created with python_avatars Bryson Loko says:

    I want to see Ty riding shotgun on a pull in mullet.

  2. Avataaar/Circle Created with python_avatars kaeto says:

    You guys really need to start taking hearing protection seriously. Get some electronic hearing protection up in the shop. You can talk like normal in between starts and not go deaf from loud noises.

  3. Avataaar/Circle Created with python_avatars glenn nikkelson says:

    that sounds like poo BAD! there is no way i would be driveing that with that motor you guys did the lazy way out i think you should have LS swaped it and run the exhaust down and out the sides of the car near the doors hangin out the bonnet like that looks like poo lol come pon cleetus your makein ur self look bnad buy doin a dodgy job lol;

  4. Avataaar/Circle Created with python_avatars glenn nikkelson says:

    the taco bell car needs a big brake kit in the front lol and a angle kit for drifting

  5. Avataaar/Circle Created with python_avatars SORRY IMAJERK says:

    SO……. WHEN DID YOU GUYS BREAK IN THE NEW CAM? FLAT TAPPET NEEDS 15 MINS AT 1500 THEN CHANGE OUT THE OIL

  6. Avataaar/Circle Created with python_avatars yarrdayarrdayarrda says:

    The cam is already going flat with those Edelbrock heads and idling the engine.

  7. Avataaar/Circle Created with python_avatars yarrdayarrdayarrda says:

    No, the needles under the shooters are a one way valve, allowing fuel to be pumped out of the nozzles, but when you let off the throttle, all the fuel is drawn from the float bowl, otherwise the fuel would just draw back into the accelerator pump chamber.

  8. Avataaar/Circle Created with python_avatars Hannah Laike says:

    The mystery machine just chillin in the back, i wanna see what's up with that 😂😂😈

  9. Avataaar/Circle Created with python_avatars Gibby says:

    "Ya gotta get her squirting right!"

  10. Avataaar/Circle Created with python_avatars deegan727 says:

    Jackstand Jimmy’s Carburetor Tuning- “I’ll get her squirting for you, since you cant”. T shirt?😂

  11. Avataaar/Circle Created with python_avatars deegan727 says:

    It probably took Summit Racing longer to get those dusty parts off the top shelf than it took to ship them.😂 Those parts have been waiting for decades for the right sucker.😂

  12. Avataaar/Circle Created with python_avatars D- offroad says:

    You need ScannerDanner on Ruby’s issue

  13. Avataaar/Circle Created with python_avatars Chris Arriazola says:

    I wonder if they tried scoping crank signal while under boost to see how it changes between boost levels to see if the signal is getting crappy. Would be very interesting to see

  14. Avataaar/Circle Created with python_avatars Micko.308 says:

    Howd he manage to find a vz holden ute over there ?

  15. Avataaar/Circle Created with python_avatars Sky B says:

    Best into ever…. And I've been here from day one

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.