FATHER'S DAY MERCH IS OUT NOW! Visit http://cleetusmcfarland.com and you might end up with a random Turbski in your order!!
Tye went to work on the ole Mountain Dew Jet Boat and it's really looking better. Now it's off to JP racing for some more love! Plus some guys stopped by with an INSANE sub van that blew us away... literally!
Our 2023 Sponsors:
https://www.holley.com
https://texas-speed.com
https://www.motionraceworks.com
https://www.nittotire.com
https://www.summitracing.com
https://heatwavevisual.com
Cleetus2 Channel - https://goo.gl/Ph2wyo
Holley's channel - https://www.youtube.com/channel/UCeQfJXzg0gnfuM4tgmagCCw
**Social Media:
Instagram - https://goo.gl/LZvy5e
Facebook - https://goo.gl/gdwhh1

Hell yeah! brother, you're on the please before on YouTube channel. All right. So we have a lot of damage on this thing we have to fix. So the first thing I did was pull the engine, gas tank, seats, floor, strip, everything that's in my way and then I'm pulling all the nuts and Hardware off of the stuff that holds the uhmw on the bottom of the boat.

once all of that's pulled off. I'm gonna drag the boat outside and we have to unfortunately pressure wash the whole inside of this because there's a bunch of little sticks and dirt and stuff in between the crevices where I have to weld and if it's in there we will not get a good Weld and we will crack our boat again. Oh Dang! Ty look at that. You tired of pounding on this thing yet? got to get my shoulders a little shoulder workout.

Look at that. Bringing this big dog all day brother. you killed it. So you're saying that one's under a Stringer right there? Yeah, unfortunately this is under a Stringer so it's kind of like bound up right on the corner.

Yeah! and then we got a little one right here that I couldn't quite get all the way out. Okay, but I might try to bump this one out a little more. That looks really good though. I mean it looks ten times better? Yeah? I mean I think most of your problems that you're having was all those yeah being smooshed out looking good brother.

let's get in there. Woohoo! Start welding on it and he cracks underneath. Um, the only broken weld was right in front of the grate but oh oh yeah, is that the crap right there? Yeah. I got hammered pretty hard so wow thank you.

All right So I welded up the bottom. great crack that we had. We threw a couple passes on it and then we went ahead and flipped the boat on its side. We have the lift holding it up sideways so I go while the Stringer is easier.

So what I'm going to do is weld the top sides of all these stringers right all the way up and then we will go ahead and flip the boat to the other side and while the other side of the stringers and then we'll be done welding. Oh thank you! All right and just like that, you got a brand new boat again minus a couple things on the side. The bottom of the boat is pretty much done. There is one Dent that I cannot get out right here.

Very very small dent. Uh, no matter what I do, it will not come out because it is under a Stringer and the Stringer itself is bent. so without hitting that thing with like an excavator bucket or something, it's not moving. but the front is all done.

The sides are all redone fresh. Hardware it's looking pretty good all right boys, you got it, you know? I got it. record Oh paint oh boy. you guys just gonna go.

hold on. Hold on. we gotta do the other side first. Watch out for this lift arm James There She Goes Softest Landing This thing will have all year.

Yeah well. they're all in there. Oh it's halfway down. Too bad.

halfway back together. Oh you guys just flipped it off the boogie board. dude. Unbelievable.
it's okay. see. this is why I need to be supervising. It was your idea I Put her down I Can't believe you guys scratched my vote.

Dude what do we have here dude? the old Astro van dude these guys made this Facebook post last night. we got this crazy bass man we want to bring it by the freedom Factory I was like hell yeah. bring that thing by his month of Freedom So here we are. What's up guys, what's going on? How you doing All right you Drew? Yes sir three good job to meet you man Steve yeah nice to meet you.

We've got a big car show this weekend made of steel. okay tonight and Saturday I was like man, you know who would like something like this Just an extreme of Automotive Yeah and the boys. So how extreme is this as far as it is one of the loudest uh that plays music I'd probably say top Ten for sure, especially one that goes to events constantly. All right, cool.

Can we take a game? You're one of the ones that get out the most. Grab that door. Steven those are Stephen's man. Oh Steve Oh yeah, that's Stephen my buddy.

let's take a gander in here. That's the door, you know, you know. Damn guys. This is some crazy equipment we got here.

What are these six entries? Another eight of them. Another eight. Eights Oh brother. You got that bolt-in windshield? huh? Yep.

Quarter inch plate, interior. inch and a half. Like saying windshield looking there. You're right.

Pretty much no. Go all the way into the right. That's 12 Sundown Audio Sddn15s. Those are actually special edition Subs Made for this guy.

Oh by Sundown Audio So you got 12 15s in here. 120 squares of effective cone area for sub times. 12 Said a lot. A lot.

All right, we got a lot of math going on there, right? Yeah, we'll We'll conclude it with a lot. How many guys in The Sound world have mullets? Is that pretty standard? So I'm actually disappointed. His mullet was far more glorious. Six months ago, it had another eight inches on it too.

Are you guys gonna leave it on the trailer? That's fine. I Would love to take it off the trailer. Oh yeah. go ahead.

do it. Sam They didn't have these in your day, Huh? No. I'm telling you right now, this for the cause panic in the neighborhood right here. This would have caused big panic in the neighborhood.

My goodness, can you imagine firing to death on the phone power in your house? Yeah! I Think this door panel is what's this ratchet for the window? Oh see, they're just like McFlurry We have one of these. Oh not to be too intrusive, but a van like this. this type of equipment I mean it's got to be pretty expensive, right? Yeah, like if you were gonna pay someone to build something like this. I kind of did the math on him once.

probably about 75 000. give or take a look, it's quite the assist. I used to have a double. DIN You know what? I'm talking about head unit in my truck.
That was one thing we said and we pulled up at that building. the building's gonna rattle. Monster truck weighs about 10. so what it is.

it's just basically all speaker is is an air piston in and out so it just moves. Air moves really fast pressure. so that's why. I Like big flat buildings like that suffer.

Hey, be honest because they're basically really sensitive air pressure systems. so maybe we should just slide over here. You know? Wait, these are the only two batteries. Oh no, those are.

these are just run the motor. Oh I Have to do this. Yeah, come on. Jordan This Is My Voltage regulator.

uh alternator there alternator there. Oh yeah down there that way I can play it. Oh yeah. turns the radio on.

just bogs out. Hell yeah. All right sick. I'm having flashbacks of high school.

We got the head unit so you can walk away from it. You got the mobile head unit on there. Is this a double? DIN Yeah, All right. let's see what you got dude in the world.

Oh let's see what his Beard's doing. You're good. Oh my. God Holy crap You ready? Look at that door.

Thank you. It's like a full body massage. You gotta remember to breathe and blink. golly.

did you see that yeah when he had his face I Love it. Geez. Louise Dude. Insane tough.

That's crazy. So how do they find your uh, your Social Media stuff? Um, just Facebook Stephen Duncan or Stephen underscore Duncan on Instagram Okay, all right, baseaholic. All right. Well you guys look it up if you're interested in this stuff.

Pretty cool. Thank you thank you guys for stopping by. Manly Man! Appreciate y'all checking it out! I Like sharing this side of Colorado The automotive industry people. Yeah, foreign.


By Cleetus

15 thoughts on “More major damage on my mini jet boat, surgery begins! an insane sub woofer van destroys our ears!”
  1. Avataaar/Circle Created with python_avatars Robert Norris says:

    Ok cleeter! That’s what I Like!! BASS

  2. Avataaar/Circle Created with python_avatars Jon Elford says:

    Tye is a stud! I’m so glad I bought his t-shirt, but still a little bitter that I didn’t win the Tahoe… 😂😂

  3. Avataaar/Circle Created with python_avatars jerry henderson says:

    My 1987 Jeep Cherokee had a 260 amp alternator , do they make even bigger ones ?

  4. Avataaar/Circle Created with python_avatars SeanGreezy says:

    What I love about Cleetus right here. These boys nailed it if its extreme, He’ll enjoy it. Way to be

  5. Avataaar/Circle Created with python_avatars No thanks Google says:

    I definitely want to see more bass related content 100%

  6. Avataaar/Circle Created with python_avatars TheOneWhoWas says:

    what happened to showing the turbo winner

  7. Avataaar/Circle Created with python_avatars Tyler Smith says:

    Freedom audio is now in the works lol

  8. Avataaar/Circle Created with python_avatars Mike Honcho 3 says:

    Sam needs a mullet stat

  9. Avataaar/Circle Created with python_avatars Jon G says:

    More bass please 😂

  10. Avataaar/Circle Created with python_avatars Buck says:

    Day 22 of asking for a cleetus flag

  11. Avataaar/Circle Created with python_avatars Jason Swift says:

    Tye also has to weld up the huge splits and cracks in the hull as well.

  12. Avataaar/Circle Created with python_avatars GaryLordsWayMinistry says:

    I would have put the ribs on the underside of the boat for better gripping and cornering.

  13. Avataaar/Circle Created with python_avatars Jason Paul says:

    Man that sucker didn't clip ONCE. I had a pair of Memphis 10s in a box with a 2000W Rockford and getting the volume up without clipping unexpectedly was always tough.

  14. Avataaar/Circle Created with python_avatars Lex Ingram says:

    Tye’s a legend

  15. Avataaar/Circle Created with python_avatars Jared Eagles says:

    flying rc plane version of the jet boat would be pretty cool. like the surf board

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.