Hey guys, today's video is sponsored by Keeps and Guys Today Keeps is offering up to 50 off your first order when you go to Keeps.com slash Cletus Keeps is a subscription service that helps men keep their hair. Keep that hairline up here. You know what? I'm saying. They send proven products to your home just like these like these: Foams right here and there's three of them so I can throw one in my backpack, one in my travel bag, one next to my sink, and keeps automatically sending you more when you need it.

And Keith has all kinds of clinically proven treatments you get on their website. You tell them what kind of hair loss you're experiencing and their medical professionals will get the right treatment for you. And not to mention they offer 24 7 care and support. And at no time during this process do you have to actually go visit a doctor or go to a pharmacy.

Keeps medical providers will pick the right treatment for you and send it right to your house. Everything your hair needs right at your door And guys keep this offering an amazing deal. Like I said, 50 off and that's Keeps.com Cletus K-e-e-p-s.com slash Cletus Thanks to Keeps response during today's video, let's get to the live action. Hell yeah, brother, you're on the please before on YouTube channel.

All right! Ty I Heard you had a late evening. We had a late night but you got some stuff done. We got some stuff done. Look at that engine sitting in there right now.

it's looking way better than it did. Oh brother, you killed it. Let's see. Oh dude, that's not bad.

Wow. I'm gonna seal it up. That's not bad at all. Ty you're a beast I told you it's a Bolton swab Yeah, piece of cake dude.

Ty you're an animal brother that looks so good. So you're thinking the shifter's gonna go there now in the middle exactly exactly sure where it's going to go, but it'll probably be somewhere. yeah I can bolt onto that case in the middle and then we'll just have to make one other cut to get to that back drive. That's actually if you go to the other side that's already open and clearance too.

Oh it is. I should have known dude I should have known. Yeah, so that'll poke up through. There's a lot of shafts going around in there, but it's there may be more trimming.

there might be a little bit more. that is awesome I thought you're gonna have to cut the whole tunnel out I know, but you stood by and said I will not have to cut the tunnel out I knew I wasn't gonna have to because they're so tiny. they're like I mean they're long as can be but they're nice. like small round deal so they're pretty good.

Let's go. We're getting there hell yeah. and the engine is sitting right in the car now. Yeah Wow! Beautiful all right now.

We just got to make some motor mounts, trans mount, half a K member and then we got a rolling car again. Back in the game, Back in the game! Let's Go All right? So getting the motor in place has been a little bit more of a challenge than I expected. So I'm remaking this section of cross member right here to clear the pan and it actually has a giant cutout on the back side and it's all plated with eighth inch so it's still nice and sturdy. I Got this all tacked up and ready to rock.

The next thing I need to do is run a tube off of the side of it. uh from right in this area forward and grab it with this hose clamp like it originally was and then once it's all tacked up, we can, uh, glue it together and stick it under there and get motor mounts in it. Well Ty Looks like you got a motor that's mounted up. Dude, look at this.

Wow. Frick A little off center, a little crooked, but we'll worry about that later not worry about that. How are you feeling so far? Feeling like we got a lot to do in a little time to do it? So yeah, we're gonna have to get cooking All right. Yeah, so guys, every time Ty has built us a turbo system in the shop, they've been top-notch You know, custom headers the whole nine.

What McFlurry is about to get is the high-speed Thai Turbo kit. Yeah, there's gonna be no Precision no measuring, probably a little crooked and a lot of MiG Wells A lot of MiG welding so none of that fancy TIG welding. No fanciness, but after a sick week, we could always go back and mess with. Yeah! And I mean this car is going to be kind of a fun car for us, so we'll probably end up blowing it up and rebuilding things.

and who knows what we're going to be in for. Yeah, so guys, don't don't set high expectations for the turbo kit because that sucker is getting put together quick. one day, one day, hopefully half of one day. All right, it's got to be real quick.

Don't know if you knew this, but Mcflurry's an antique brother. Dude, a blue tags don't antique baby. She is registered ready for the road. foreign.

We don't really want to take it out again, but we forgot to fill it. So now we're hole sawing holes above the fill holes so we can put some fluid in this unit. and then we gotta add a dipstick for the Bruno Oh I got the seed in. Oh oh brother, let's see if it's gonna work.

Oh that's perfect dude. you just did that my man. Well I got it man. I mean it's mounted? Yeah, we're 10 miles away still.

But so we're gonna have bars going forward and backward in this unit? Yeah, I mean this is looking like a problem right here. Like how is that bar gonna make it to here that? I don't know yet. Jackson it's pretty far away. Should I come back to this one sometimes for each of her stuff's not the best.

That is pretty fun. That sucks I mean all this is gonna have to come out well. you can't cut too much out of this middle one. Well I mean cage is already certain.

so technically we can do whatever we want. No I don't think this plays any part so we don't. We almost need to put the shifter at this one can I cut this piece out. Yeah, this bar here.

yeah, this doesn't. this don't matter anymore, that matters. You want to keep that? Okay, Okay, all right, can you go back One space right? We should be right in front. Well, there's one right here.

Yeah, right in between. there's one right here I can hit that one up? Yeah, Bog your hole a little bit more dude. I Just gotta come like back to here and I think we'll be good? Yeah I'll make a project panel after all right. Easy Peasy Piece of Cake Plus it's gonna have carpet.

Maybe it'll cover the hole Yeah Foreign. You know, looking at this it looks miserable. but I still think Ty has the worst job out of all of us I definitely has the worst job 100 all right. George Putting in flex plate bolts.

we got the lanco pretty much done. Check this unit out. just waiting on Sam to get back. He's tapping a couple of the rods for me.

We got all the holes done. We just got to put some oil in it in the morning. James is finishing up some routing for fuel lines and transmission lines. How your Line's going James fuel is done minus the feed from a filter to that rail.

Okay, transmission's done minus the air. All right. We're making an executive decision right now. There's five people here.

Prepare to cast your votes. Anonymous Let's do all right. all in favor of skipping the intercooler. Raise your hand.

Come on. George Come on. George I Know you won. Someone raising? Come on.

George Yeah, no intercooler. It doesn't mean I Think it's a good idea, but it doesn't sound like we have a choice. Let's go. Ty You just say five hours of fabricating I don't know Godzilla is gonna have some hot air going into it.

We're gonna have to run like C16. we'll put uh, injectors in the charge pipe. That would help a lot, but we'll just run some C16 in it. Gonna be a little bit more expensive on the fuel side.

See, now, you're gonna really blow it up. James We start getting nitromethane in it. All right guys. Massfab sent us a wing for Ruby but that's not why we're getting into this box today.

we're getting into this box as they sent us a part we need for the halftex. There it is. Dude, that's cool. a Billet A Billet Yeah Billy kills me.

Boom. Okay, all right. cool, fancy. Don't want any Mcflurums There you go.

I'm ready. Phew. All right First, reverse fully engaged brother. you gotta put some juice on them.

Yeah, she's done dude. nice job dude. Yeah, so sick it's gonna Tighten Up the Jam nuts. This one.

take some customization as you can see but it's in there. it's in there brother. that's got a lot of trouble in the last one. the last one.

Yeah, but instead of you having to push it, it'll work right? That'll work hopefully. I mean we don't really know. but I think so. it looks really cool.

dude. I Mean it is. It is what it is. It's signs.

How do we got the transmission What we're supposed to? This would probably be dialed here. We are. Thanks for the help. Sam Thank you Sam Did a lot of machine work for us there.

Yeah, gear grabbing. good stuff. That's right. let's grab some dinner and get back to it.

This is: Sam Sam Came up with a new name for McFlurry a little nickname. Oh yeah, what's that Lanco's thing? Oh the Lanco's thing. It's pretty good. Apparently it is pretty good.

Yeah, uh. the one on left, a little high left. you're laughing my left I don't know. left from right.

So I guess just weld it on brother. Listen, we gotta Make It Sick we just weld that thing. Is it hurting your brain to not have them perfectly level? I'm dying inside guys. this is still Ty's idea of uh, you know, just throw together kit.

still looks really nice. rod knock Rodney there they are. Brother, they are. That's Leroy's old bull horns I mean we need them time to repo these things.

Yeah, save me another two hours. I'm gonna go home actually and get some sleep I know I Think you're actually gonna get home on time because of all this stuff we're we're figuring out they're a little rusty I'll get them I'll get sand polishing them ASAP Yeah, it'll be Chrome by morning. All right. Bud Our brand new, nice beautiful pieces for this carpet.

so it's not the end of the world. Grab that other side, you know it ain't no. Blazer To be all right, you gotta hold it up here. dog.

Definitely don't want to hit the levers you got to pull up like so I know where my cut stream. Lay that down. Look at that dude. Done.

You actually made a pretty good cut there. Pretty good cut. Probably gonna have to come over like this now. This is our bar here.

right after that we only have to do one like this now. Something like that. You got the right tool. Something like this came in the lanco.

Box Remember that that's for cutting your carpet. We'll take your bar out right here. You know what? I'm thinking about leaving that bar in there leaving her covered. Yeah, Why is it got to be uncovered? That's true.

It's working just fine now. Now what we're gonna do? What? Grab this right here. Put your hand right here right here. Point the Third one.

All right there. What is this thing up all the way? Oh, we get crazy making more. Cuts Like That That's good. It's coming together pretty damn good right now.

Golly. All right guys. everyone. look.

this is Ty's idea of fast welding junk welding junk. I Can't help himself. but you look nice. Put him here.

you don't get that's kind of cool poison. You won't get poisoned. Those things are specifically designed for a car with no body on them. I Think you could do that? The center one that's pretty cool, right? I mean I mean who's doing something ridiculous? It's gonna make our already hot intake Air temps even hotter.

but who cares at this point. Does it look cool in there? Yeah, it looks freaking sick. Yeah. I Mean that'll work.

At least we don't have to fabricate more stuff. Oh, let's see what you brought. That's what we need right here guys! Is the Motion Race Works Butt Cheek Kit: This is the Butt Cheek Why? Boom, Put it on like that. Get rid of this.

That'll slide back. Yeah, we just bolt that on. It'll put it in a good spot for you. It'll go in a really good spot.

So normally this is like impossible. That's gonna make it super easy and quick. Yeah, it's gonna really make that turn quickly. All right.

Ty's gonna be in good shape now. look at that unit. Shining Now all he's got to do is connect the Turbo from here to here and the Turbo Kit's done. Basically done brother.

We're pretty much there. This is awesome. Big save from Pryka. Thanks buddy! Drove this over from TBM Got the seating.

got the carpet looking dialed in here. Zach What's the wiring update? We got wire. We got wires. We got a fuel pump, fuel level sending unit.

the James likes to run out of gas all the time. They got a big tank. Dude, they're gonna be able to outrange the Elko Our switch panel's done over there looking. Oh yeah, let me check that out.

that looks good. Nice job brother. Nice killing it nice. Breakers So yeah, we don't blow anything up here getting after it.

All right guys. We have made a ton of progress so it's got the battery mounted stuff's looking really good up here. we are calling it for the night except for Zach Zach's staying to do some wiring real late, but uh, we're pretty much there for the night. We're gonna hit it in the morning and this thing will be running tomorrow.

So freaking close. Just got a couple things Sam's tightening up the front end. we gotta get our headlights, tail lights hooked up. Zach's got majority of the work now.

Yeah with wiring I Want to fire this thing up in here? though? it's gonna sound awesome our first ever. Godzilla Fire up in the shop I'll be putting the video out as soon as we get this thing running and on the dyno, that's it for now. Thanks for watching. Do it for now.

We'll freaking see you later. Foreign.