Guys, not sure if you've ever seen our handy dandy engine lift plates, but we got one here mounted on Gen 3. LS We got a Gen 4ls Gen 5 which is an LT Hellcat look at the it's for a boat we got Hellcat engine lift blades. We got modular engine lift weights and then we got Coyote Ninja lift plates. and today I'm going to show you just how strong these lift plates are.

Okay brother. inbound got a big cable chain. This looks good. Part One success.

No, we'll leave it on there. Oh here we go. we've got it back up. It's low enough.

Yep, a little more. I Gotta get through the doors are gonna run the floor. They can run the block. Oh you're gonna put it in the truck I See No! I'm gonna whip at the back of the truck.

Lift plate is going to be strong enough to hold the engine and the back of Bounce pickup truck. Yikes! it's a big truck Bud! Oh, watch the tailgate brother. Jeez. Louise There we go.

We'll do the old classic wrap it through the hole. You're right up to Doug's pickup up truck. Calm down. A little slower than last time.

Okay, all right on up. a little bit up a little bit. Okay, all right. see the strength of motion race Works Engine lift plate change slippery flipping Loops I could probably hold it.

Oh, you're picking the truck up. that's now that's a left plate. Don't let it roll into you. Oh God yeah I think you should look up.

Also, the other down, you're about to hit the front bumper. Brother: you're about to Fiero This thing. I Mean if that doesn't make you want that lift plate. listen, there's nothing that will.

There's probably not even check the engine lift plate. Oh my God. dude. didn't even tighten the bolts.

Got a scratch on it. Run over this crap. everything's failing. But the lift plate.

Can't wait to the left plate. This place is strongest thing about this. LS Right now. Hey Listen Safety first.

Get it. Motion Raceworks Engine Lift Play Don't risk it with two 10 millimeter bolts, Get a lift plate. It can lift an entire truck. Hell yeah! brother.

You're on the please before on YouTube channel those for the FedEx truck for the Blazer brother. Yeah, that's the wide babies. Holy crap, these things are huge. That's how you do wheelie right there.

That's a that's a street wheelie coming right up. Does that say on it? Godzilla Bread Dude, what's in there? What in Tarnation do we have going here? Brother: This here's a Wheelie Popper Dry Hopper 1000. golly, what do we got? About 100 pounds if you ever take give or take 100 pounds plus the weight of the hitch? About eight, about 10 pounds of weld. All right.

A little loose I like how you designed it so it can be a wheelie bar. Yeah. Dual Purpose Will the wheels hit first? Yeah, it looks like they actually will hit first? Okay, you hit them. Wheels You might end up with them exit in the vehicle.

Yeah, yeah, one might spin off one way or another. Yeah, oh that's true. Yeah, Oh okay. design there was not.

They didn't have any left hand thread. Not ideal. Let's throw some safety wire on that zip tie. maybe.

you know the uh We're Not Gonna worry about that for now. Built it with the idea of being able to add more. Yeah, yeah, yeah. All right.

So guys, we were thinking the other day if we're gonna be doing this no prep thing. One, we need wider tires so you guys saw the Mickey Thompsons we got with the W on them. Two, we need more weight bias in the back so we can do a wheelie on the street because if we're losing, we might as well be doing a wheelie. You know what? I mean you're either going faster, looking cool trying so we're going for the looking cool.

Yeah, so we got a lot of weight way back from the back tire. So ideally this is really gonna lever the Blazer into doing a street wheelie. So I guess we're ready to rip. Yeah, we can also put one of these up high too.

You know, being that it's yeah, all right center of gravity on this thing I think this is this should be plenty. So what we'll do is we'll take the weights off and try it with just the tire. I Think to see what it does, we'll take the weight off to see if we gain anything going to the W Tire Them being a fresh Tire over the old ones we had are definitely going to be an advantage so we'll see what we picked up with that. Maybe throw some more in it, then throw the weight on it and see what it does.

Let's go do it. We also have had several different prep style juices laying around so we're switching. We're gonna try them all here. We're going to try them all so far I'm happy with all of them.

The other day it worked good. This will probably work good too. All right, is there fuel in there? Yep. we're gonna need that.

How you feeling it's topped off I'm feeling like if I felt any better I'd already be on too much I Think you're really psyched about this no prep stuff. Oh I'm loving it I'm loving it I mean look at this just looking at this. the driveway. This fires you up.

This fires me up All right. We'll suit up brother. Let's make a little rip a little tire Chip Rip. Let me see, it's actually glitter.

Oh yeah. Oh wow. All right. so this is bigger tire.

no weight at the moment on the wheelie popper. dry Hopper 1000. 00 Okay, is that solid? Damn, that's nice. He wasn't really fully on it, but so we just stick the weight on it.

See what it does? Oh, that gave me a little scared. All right. what's the plan? Now add that 100 pounds and see what it does. Tires aren't even broken in so we want to throw the weight on and just see the difference.

And guys, you really can't see these tires broken in yet. But we're just gonna say screw it and throw the weight on it and just see the difference you want James to drive so someone will stay in it. Boy, put the weight on I'll lift after it gets second gear. It seemed like that.

That right faster I Ain't gonna be able to stop Brother That didn't seem like too bad of a first hit. No, it was good. We need to get a g meter on this thing. Maybe a draggy? Yeah, okay here we go.

We are weighted up. What could go wrong? Are we just skipping doing 50 pounds just going straight for 100. straight to 100. All right, another burnout Foreign that is awesome.

Come make a hit in the Raptor later. Blazer Couldn't even spin them all right. Round two: let's put the weight on. Should see some a little bit more spectacular here.

Well what do you think? Definitely helped. Definitely he's moving faster Now this is where we play. Do we give it the more power to make it do the same thing as doing without the weight? I Don't know he's in the tire or do we just keep adding weight till it. Wheelies: what are your tire pressures? That was uh, 12 and a half pounds.

And my professional opinion, you drop them one pound I'll add some power Ty What do you think that was good to me? All right, let's do it. Yeah, yeah, we'll speed it up All right. Here's what we're gonna try. That one's not good.

We're gonna put some more power in it. We're gonna drop tire pressure. do another big burnout. Yeah.

put you right in it and we're hoping for that wheelie. I Know the ground is getting tight. It is like the track. It is getting tight all right.

We added a little bit of timing back in there so hold on. they're starting to hook up. That's sweet. Nothing even want to do a burnout now I Think he's still in second.

so I need to do the burnouts in first. Now that's funny. it's gonna be good I Like this I Like this foreign. Oh, we got smoke down there.

Grab that fire extinguisher. It's good. It's not on fire. What happened? What's the deal? huh? Engine locked up.

It'll spin but there's a lot of stuff going on. Oh no, what's the deal I Just I Couldn't hear but I just felt what I think it might have. It might have broke the crank, broke a rod. Hopefully it's just oh wow, the bell's loose.

After all that the crank breaks on such a low power, setting the front driver tire off the ground. It's a good thing we got a short block sitting in the back. It's a good thing because we don't have a lot of time. Hey, made it a lot longer than we all thought it would.

Yeah, yeah, it's all right buddy. don't be too bummed out. You felt like she was gonna do a wheelie the next time the next time. Dude, that was the first time it picked up the front left.

Oh, it did. Yes, this engine though for real, made it a lot longer than we all thought. We all thought that crank was snapping off one weekend head gaskets were blowing about three times ago. Let's push it.

damn. R.I.P Turn it over real quick. Really? Yeah. I Just hit it one time.

see what it looks like? Okay, okay. whoa. Crank was definitely wobbling. Brother: there's oil.

You got oil on our drag strip. George Now we have to try and slap the Blazer back together with all the spare time we have before. Tx2k crap. Well that sucks.

Wow. she's definitely out of round. Brother: crazy after all this time and like we're running 25 pounds of boost to the track. now we're on 18.

and then just finally chose a point. Oh no, the whole balancer might just pop right out if you do that a couple more times. Well guys, we'll keep you updated on the Blazer. We definitely have to get this back together really fast so that sucks, but per usual we'll figure it out.

That's it for now. Thanks for watching Do It! for now. We'll freaking see you later! It's been an expensive month shoot.